St. George Concrete Leveling
- Thousands of satisfied customers
- Local and family owned
- 15+ years in business
- Licensed and insured
- Always FREE Quotes
Trusted, Fast-Acting Concrete Leveling in Cedar City, UT
Uneven slabs, sunken steps, and trip hazards don’t have to wait. With 15+ years of local experience, St. George Concrete Leveling delivers precise, long-lasting results backed by licensed crews and full insurance. We lift driveways, sidewalks, patios, and interior slabs using proven methods that restore safety and curb appeal - often the same day.
From freeze-thaw damage to hydrocompaction settlement, we know Southern Utah soils. For reliable Concrete Leveling Cedar City UT homeowners and businesses trust, we’re here to help. Friendly service, clear pricing, and a written warranty come standard. Call us today for a free on-site estimate.
Concrete Leveling & Lifting Services for Homes and Businesses
We specialize in concrete leveling and lifting that saves time and money compared to full replacement. Our team uses industry-proven materials, precision equipment, and safe work practices to stabilize soils, eliminate trip hazards, and relevel slabs for a smooth, lasting finish.
Polyurethane Foam Injection
When concrete settles or voids form under a slab, our high‑density polyurethane foam (approx. 2-4 lb/ft³) expands to lift and support it from below. We use a heated two‑component proportioner and slab lifting guns (e.g., MixMaster Pro/PX‑7) for precise, controlled lifts. Small 5/8 in injection holes, rapid cure, and minimal mess mean driveways and walks are often traffic‑ready within hours - even in colder months with heated lines. It’s ideal for polyjacking applications where speed and accuracy matter.
Learn more about our Polyurethane Foam Injection services.
Driveway Leveling
Sunken or sloped driveways create puddling, cracking, and tire-rubbing transitions at the garage. We laser-level the slab, perform targeted polyurethane injection, and monitor lift with dial indicators to restore proper pitch and drainage. Where soils are weak, we add deep injection for soil densification and void filling. Results: smoother entries, reduced pooling, and longer pavement life - without tearing out concrete or blocking your driveway for days.
Learn more about our Driveway Leveling services.
Sidewalk Leveling
Raised panels and gaps can breach ADA change‑in‑level limits (1/4 in vertical; 1/2 in beveled) and create liability. We relevel panels with foam jacking to remove trip hazards and dial in slopes to align with ADA guidance (max 2% cross slope; 1:20 running slope). For stubborn lips, we combine lifting with light bevel grinding. Our crews use OSHA-compliant silica controls with HEPA vacuums and shrouds for a cleaner, safer site.
Learn more about our Sidewalk Leveling services.
Garage Floor Leveling
When interior slabs drop, you see binding doors, slab cracking, and tripping at thresholds. We correct settlement with precise polyurethane injections and optional self‑leveling underlayment for tight interior tolerances. The process is low‑dust, quick to cure, and designed to stabilize subgrade voids that often form from moisture or hydrocompaction in Iron County soils. Many projects return to foot traffic the same day.
Learn more about our Garage Floor Leveling services.
Trip Hazard Removal
Municipal walks, HOAs, and commercial paths must stay safe and accessible. We remove trip hazards by lifting misaligned panels and, when needed, bevel grinding to meet ADA thresholds. Our crew coordinates Blue Stakes of Utah 811 utility locates prior to drilling and follows OSHA 29 CFR 1926.1153 for silica control. The result is a clean, compliant walkway without the cost and downtime of full replacement.
Learn more about our Trip Hazard Removal services.
Other Services We Offer
- Polyurethane Foam Injection
- Mudjacking Services
- Driveway Leveling
- Sidewalk Leveling
- Patio Leveling
- Garage Floor Leveling
- Pool Deck Leveling
- Concrete Slab Lifting
- Foundation Slab Leveling
- Concrete Settlement Repair
- Sunken Concrete Repair
- Trip Hazard Removal
- Concrete Void Filling
- Soil Stabilization for Concrete Slabs
- Concrete Crack Repair
- Concrete Resurfacing
- Concrete Joint Repair
- Commercial Concrete Leveling
- Warehouse Floor Leveling
- HOA & Community Concrete Repairs
- Concrete Step Leveling
- Porch & Entryway Leveling
- Retaining Wall Stabilization
Why Choose Us for Concrete Leveling in Cedar City, UT
At St. George Concrete Leveling, we combine local soil expertise with advanced lifting methods to deliver durable, warrantied results. Our licensed, insured crews handle residential, commercial, and municipal work across Iron County. Whether you need foam jacking for a fast, clean lift or guidance on mudjacking alternatives, we bring the right equipment, materials, and safety practices to every job.
Proven Local Expertise
Our team has completed thousands of lifts across Southern Utah, including Cedar City, Enoch, and Parowan. We understand how freeze-thaw cycles, irrigation, and hydrocompaction zones influence settlement. We reference Cedar City planning maps and subsidence data to choose the best lift strategy - foam density, injection points, and optional deep injection - to support the slab and reduce future movement.
Case in point: a Fiddlers Canyon driveway settled 1.25 in along the garage apron. We installed 12 foam ports (5/8 in), performed staged lifts, corrected pitch for drainage, and had it drive‑ready in under 90 minutes - no demolition required.
Certified Team and Proper Licensing
Our crews include ACI Concrete Flatwork and ICRI CSRT-trained personnel, with OSHA 10/30 construction safety training. We operate under the relevant Utah contractor classifications (e.g., S260 and S262 for grout/injection work) and encourage verification through Utah DOPL’s Construction Business Registry. Manufacturer training on foam systems (Alchatek/HMI) ensures we follow product specifications for reliable performance.
Before any drilling, we coordinate with Blue Stakes of Utah 811 (statewide one‑call) to locate utilities - usually within three business days. You get professional work, documented procedures, and peace of mind.
Equipment, Materials, and Cold‑Weather Readiness
We run heated two‑component proportioners, MixMaster Pro/PX‑7 guns, laser levels, and dial indicators for precise lifts. Our high‑density polyurethane (approx. 2-4 lb/ft³) expands to fill voids and stabilize slabs; we commonly use formulations comparable to Alchatek AP Lift products. OSHA silica controls include HEPA dust collection and shrouded drilling.
Winter concrete leveling in Cedar City UT is part of our playbook. Heated hoses and on‑rig temperature control help foams react and cure reliably in cold conditions, limiting downtime and keeping projects on schedule.
Transparent Pricing, Options, and Warranty
Typical Utah foam lifting runs around $4-$7 per square foot depending on access, thickness, and stabilization needs; mudjacking sometimes lands on the lower end but uses larger holes and longer cure times. We explain mudjacking vs. poly with pros and cons for your slab, then provide a clear, written estimate.
Every project includes a written warranty on lift/material for defined areas. We also advise on post‑lift joint sealing and drainage to protect your investment and extend service life.
Concrete Leveling Across St. George & Southern Utah
St. George Concrete Leveling proudly serves homeowners, HOAs, and businesses throughout Southern Utah - Cedar City, Enoch, Parowan, Paragonah, New Harmony, Kanarraville, Brian Head, and more. If you’re within about a 25-30 mile radius of Cedar City, we’ve likely worked in your neighborhood. Count on fast scheduling, local know‑how, and dependable results.
Serving All Neighborhoods in Cedar City
We level slabs across Cedar City ZIP codes 84720 and 84721, including Fiddlers Canyon, Cedar Highlands, and areas near Southern Utah University. From winter freeze-thaw to irrigation‑driven settlement, we tailor lifts to local conditions and reference city ADA ramp and sidewalk resources when needed. Expect responsive service and clean worksites.
Whether it’s a wavy patio off Main Street or a sunken storefront walk along University Blvd, we handle it. For dependable Concrete Leveling Cedar City UT residents rely on, we’re ready to help - backed by utility locates and city‑aware practices.
Locations We Serve
- St. George
- Washington
- Santa Clara
- Hurricane
- Springdale
- La Verkin
- Ivins
- Toquerville
- Leeds
- Cedar City
- Kanab
- Cedar Mountain
- Pine Valley
- Apple Valley
- Dammeron Valley
- Rockville
- Enterprise
- Beryl Junction
- Beaver Dam
- Entrada (St. George)
- Sunriver (St. George)
- Bloomington
- Green Valley
- Bloomington Hills (St. George)
- Santa Clara Hills (St. George)
- Pioneer Park Area (St. George)
- Sunset (St. George)
- Dixie Springs (St. George)
- Ivins Red Mountain (St. George)
- Tuacahn Area (St. George)
- Bloomington Country Club (St. George)
- Washington County
- Iron County
- Kane County
- Beaver County
- Garfield County
Frequently Asked Questions
What is polyurethane foam jacking and where can it be used?
Polyurethane foam jacking (often called polyjacking or foam jacking) injects expanding foam beneath a slab to lift and support it. We use small 5/8 inch holes to access voids, then control lift with laser levels. It’s ideal for sidewalks, stoops, driveways, patios, pool decks, garages, and interior floors. In Cedar City and Iron County, it’s a great option where quick cure, minimal downtime, and precise elevation control are important for homes, HOAs, and commercial sites.
How does slabjacking work?
Slabjacking lifts concrete by injecting material beneath it to fill voids and raise the panel. The process is: drill access holes, inject foam or slurry, monitor with levels and dial indicators, then patch holes and seal joints. We offer polyurethane foam injection for smaller holes and faster cures, and we can discuss mudjacking (cementitious slurry) where appropriate. The goal is a stable, even slab with restored pitch and reduced trip hazards - without full replacement.
How much does concrete leveling cost in Cedar City?
Costs vary by slab thickness, access, and how much lift or stabilization is needed. As a guideline, Utah projects often range around $4-$7 per square foot for foam jacking; mudjacking can be somewhat lower but uses larger holes and may require longer cure times. After a site visit, we’ll provide a firm, written estimate and options. We also explain long‑term value, including joint sealing and drainage improvements to protect your investment.
Is polyjacking better than mudjacking?
Each method has pros and cons. Polyjacking uses smaller holes (about 5/8 in), cures quickly - often ready the same day - and is lighter, which helps reduce added soil load. Mudjacking typically costs less up front but uses 1-2 inch holes and can add more weight beneath the slab. In Cedar City’s variable soils and freeze-thaw climate, we often recommend polyurethane for precision and speed, but we’ll advise based on your slab and budget.
How long before I can drive on leveled concrete with foam?
Most foam-lifted slabs are ready for foot traffic within minutes and light vehicle traffic the same day, often within 30-60 minutes after final injection, depending on temperature and slab thickness. In colder Cedar City conditions, our heated equipment helps maintain proper reaction and cure. We’ll confirm traffic-ready times on site so you can plan around garage access and driveway use.
How big are the drill holes for foam vs. mudjacking?
Foam jacking typically uses small, discreet holes - about 5/8 inch in diameter. Mudjacking often requires larger ports, roughly 1-2 inches. Smaller holes mean a cleaner finish and less visible patching after leveling, which is why many homeowners and businesses in Cedar City prefer polyurethane for highly visible areas like front walks, porches, and decorative driveways.
Does leveling fix ADA trip hazards on sidewalks?
Yes. We target trip lips and panel mismatches to meet ADA change‑in‑level limits (1/4 inch vertical; 1/2 inch if beveled). We also pay attention to slope and cross‑slope (2% max cross slope; 1:20 running slope target). For Cedar City projects, we can reference city ramp/sidewalk resources and help restore safe, accessible paths without full replacement, minimizing downtime for pedestrians and customers.
Do I need to contact Blue Stakes of Utah 811 before concrete leveling at my home?
Yes. Before any drilling, utilities must be located. We coordinate with Blue Stakes of Utah 811 - the statewide one‑call center - to mark buried lines, typically within three business days. This step protects your property and our crew and is standard practice for Cedar City and throughout Southern Utah. We’ll handle the request and schedule the work once clear.
How do Cedar City’s hydrocompaction or subsidence areas affect leveling?
Hydrocompaction-prone or subsidence zones can leave weak or collapsible soils beneath slabs. We address this by adding soil densification (deep injections), increasing support across the footprint, and sealing joints to limit future water intrusion. We review Cedar City planning maps and site conditions to recommend the right method and foam density, then provide a plan to stabilize the slab - not just lift it.
Will polyurethane lifting foam perform in Cedar City’s freeze-thaw climate and higher elevation?
Modern high‑density foams are closed‑cell and moisture-resistant, making them well suited for freeze-thaw conditions. We use heated proportioners and hoses to ensure proper reaction and cure at elevation and in colder weather. Once cured, the foam won’t wash out, and it resists water intrusion. We’ll match product and injection strategy to your slab thickness, temperature, and soil conditions for consistent, durable performance.